Windermere Fl Driveway Cleaning
A driveway is a type of private road for local access to one or a small group of structures, and is owned and maintained by an individual or group. Driveways rarely have traffic lights, but some that bear heavy traffic, especially those leading to commercial businesses and parks, do.
What is Pressure Washing?
Pressure washing or power washing is the use of high-pressure water spray to remove loose paint, mold, grime, dust, mud, chewing gum and dirt from surfaces and objects such as buildings, vehicles and concrete surfaces. The volume of a mechanical pressure washer is expressed in gallons or liters per minute, often designed into the pump and not variable. The pressure, expressed in pounds per square inch, pascals, or bar, is designed into the pump but can be varied by adjusting the unloader valve. Machines that produce pressures from 750 to 30,000 psi (5 to 200 MPa) or more are available.
The terms pressure washing and power washing are used interchangeably in many scenarios, and there is some debate as to whether they are actually different processes.
A pressure washing surface cleaner is a tool consisting of two to four high-pressure jets on a rotating bar that swivels when water is flowing. This action creates a uniformed cleaning pattern that can clean flat surfaces at a rapid rate.
Hydro-jet cleaning is a more powerful form of power washing, employed to remove buildup and debris in tanks and lines.
Pressure washing is employed by businesses and homeowners to reduce allergies, minimize hazards, and improve aesthetics. A pressure washer is used to clean surfaces such as:
Depending upon the surface to be cleaned, higher or lower pressure should be used, as well as the appropriate nozzle.
Pressure washer nozzles alter the direction of flow and velocity of the water. Nozzles allow users to reach a greater distance or apply more pressure to a difficult to clean surface, however, they can be dangerous. Nozzles are color coded for easy identification, with black nozzles covering the widest degree (65°) and red nozzles covering the least (0°). Great care should be taken when using a 0° nozzle as it can cause injury to the user and damage to surfaces.
What is involved in the Windermere Fl driveway cleaning process?
What stains can we remove?
We can remove stains, tire marks, grease, grime, oil and sprinkler rust without damaging the surface or surrounding areas.
How do we restore the look of sidewalks and driveways?
Our knowledgeable technicians correctly diagnose your driveway’s condition and by using the right equipment, techniques and environmentally friendly cleaning agents, can safely return your driveway from ignored to restored.
Benefits of a clean walkway and driveway
The benefits of having your driveway professionally cleaned include more curb appeal and heightened home value, discourages weed growth, reduces health hazards such as mold, mildew and algae, and it helps your driveway surfaces last longer.
It is also important to maintain a clean driveway so that trips and falls from slippery surfaces are minimized. Oil and grease mixed with rainwater make for a very slippery surface on which to walk.
How much does driveway cleaning cost?
The cost of driveway cleaning depends on the size of the driveway and the extent of the stains that we have to remove.
What is the best cleaning method for driveways?
Although there are several ways to tackle the job of driveway cleaning, the most efficient method is with a pressure washer and surface cleaner. These tools, along with the correct cleansers, can get your driveway looking like new again in the shortest amount of time.
How can I keep my Windermere Fl driveway clean?
Over time, dirt, grime, mold, algae and stains can build up on your driveway. To stay ahead of this staining, it is advisable to regularly hose off your driveway and treat stains such as oil, gasoline or car fluids, right away before they have time to set.
Driveway Cleaning Tips for Better Curb Appeal
Nothing is quite as aggravating as discovering that the delivery guy’s van leaked oil on your driveway, or that the dried leaves you didn’t sweep up last fall created stubborn brown stains that won’t rinse away. But your home’s curb appeal doesn’t have to suffer a setback. With the right supplies and a little elbow grease, you’ll soon have your driveway looking good again. Whatever the stain or discoloration on your driveway, we’ve got the best driveway cleaning techniques to solve it.
Driveway Cleaning Tips to Remove Oil Spots
Auto-Related Oil and Solvent Spills
Motor oil, brake fluid, and gasoline spills are more visible on concrete than asphalt (asphalt’s black coloring hides the stain some), but it’s still imperative to promptly clean them off both types of driveways to prevent serious stains. What’s more, auto-related oils and solvents can interact with asphalt’s petroleum base so that it deteriorates and softens.
On either type of driveway, first soak up as much of the fresh spill as possible with an absorbent product, such as kitty litter. Give it a few hours to absorb the excess spill, then scoop up the litter and sweep the area. To remove the rest of the spill, use one of the following driveway cleaning techniques for your specific hardscape material.
Asphalt follow-up: After absorbing the excess spill, spray a biodegradable oven cleaning product on the affected area (make sure it specifies “biodegradable,” so that you do not splash or rinse away any caustic chemicals into your lawn) and let it sit for up to 30 minutes before rinsing away with your garden hose. Just as oven cleaner dissolves tough grease in your oven, it will break down the remaining oil or solvent, allowing you to safely rinse it away.
Concrete follow-up: Unlike asphalt, concrete’s slightly porous surface allows spills to seep into its tiny holes. The best way to remove the remaining product from concrete is to dissolve it and then draw it out. Mix a moisture-absorbing product into the liquid TSP to create a thick paste. (We recommend corn starch for small spills or for larger spills, diatomaceous earth, available for purchase online and at swimming pool supply stores.) Spread the paste over the affected area, be it a fresh spill or an old stain. Work it into the concrete surface with a stiff-bristle nylon brush. Spread an additional thin layer of the paste on top and let it dry completely. The TSP will break down the oil or solvent components and the absorbing product will bind them. The paste could take anywhere from 30 minutes to a couple of hours, depending on outdoor temperature and humidity. Use a putty knife to scrape away the dried paste and then rinse with a hose or power washer. Old stains may require more than one application to remove.
Need a hand with your cleaning project?
Leave the dirty work to the pros. Compare quotes from the best local exterior cleaning experts in your area today.
After a winter of snow and slushy roads, it’s nearly impossible to keep automobile tires from tracking dirt and mud on your driveway where it hardens like a rock as it dries. If you have a power washer, this is a good time to take it out; if you don’t, you can clean away the dirt and mud with a stiff-bristle push broom and a garden hose. This driveway cleaning technique works equally well for both dirty asphalt and concrete driveways. First, sweep away loose dirt and bits, then dampen caked-on mud and let the water soak in a few minutes before scrubbing the loosened mud with the push broom to break it up. Depending on how much you have to remove, this could take a while. The trick is to use plenty of water.
Driveway Cleaning Tips for Removing Leaf Stains
Decomposing Organic Matter
If you neglect to rake up the mess of organic matter that has spilled onto your concrete driveway, piles of mulch, fallen leaves, and pine needles can leave harmless yet unattractive brown stains behind. (These only appear on concrete, since darker asphalt can mask the color.) As they decompose, they release tannin, a colorful byproduct of the natural decaying process. While the color will eventually fade from concrete, you can help hurry the process along with a little bit of driveway cleaning.
Sweep the concrete surface, then spray the stained area with a garden hose to rinse away dirt. In a large plastic bucket, mix ½ cup of liquid dish detergent into 3 gallons of hot water. (Or, for the best results on tannin stains, use a powdered laundry detergent that’s advertised as being good at removing food stains.) Slowly pour the solution onto the tannin stains and work the liquid into the concrete using a stiff-bristle nylon brush. Rinse with the garden hose and, while the concrete is still wet, sprinkle powdered laundry detergent over the stains and scrub again. Leave the detergent on for a few minutes then rinse away. Repeat if necessary.
Paint splatters left behind from a furniture project you brought outdoors a nuisance on both concrete and asphalt.
If dealing with a latex-based paint spill, you can often remove it by wetting the splatter with water, sprinkling on household scouring powder, scrubbing it with a stiff-bristle nylon brush. Rinse with a garden hose.
Oil- and acrylic-based paint splatters are tougher to remove. If you have an asphalt driveway, the best solution may be to coat the driveway (or just the paint-splattered area) with an asphalt sealer, which will renew its black surface and cover splatters. That’s because the solvent that removes oil-based paint can actually damage asphalt, making it only suitable for concrete driveways. Removing paint from concrete is similar to removing it from an old piece of furniture you’re refinishing—strip it off! Pour or brush a paint-stripping solution on the splatters, and work it into the concrete with a stiff, natural-bristle brush. Leave it on for the time specified by the manufacturer and then rinse it away. Since you’ll be rinsing the paint stripper away, it’s a good idea to use a product that’s safe for the environment. Low-VOC strippers (such as Citristrip, available on Amazon) are good choices for the job.)
While not an issue on black asphalt driveways, rust is an eyesore on concrete—and happens as quickly as overnight. Just leaving a paint can out on the driveway during a rainstorm can result in a dark rusty circle by morning. Fortunately, muriatic acid will remove rust stains without much trouble, but this harsh acid (available at most hardware stores) requires extra safety precautions when using it. Wear long rubber gloves and protective eyewear, and follow the motto you learned in high school science class: “Do how you otter (ought to), add acid to water.”
By slowly pouring ¼ cup acid into a bucket already filled with 2 cups of cold water, you’ll minimize the risk of splashes. If any solution does splash onto your skin, rinse it off promptly to avoid irritation. Then, carefully pour the mix onto the rust stain and gently scrub the surface of the concrete with a stiff-bristle nylon brush. Allow the driveway cleaning solution to remain on for a few minutes before rinsing away with a garden hose. Heavy rust stains may require two or more treatments.
Learn more about the types of pressure washing services and features we do on these topic pages:
Learn more about Windermere Fl:
Windermere is a town in Orange County, Florida, United States. As of the 2010 census, the town population was 2,462. It is part of the Orlando Metropolitan Statistical Area.More Windermere information.